The software used by More CNC Machines…

Don’t Wait

Black Friday sale ends on Midnight November 30, 2017.

Don't Wait

Black Friday sale ends on Midnight November 30, 2017.

Select Version

Mach3 $160.00 USDMach4 $185.00 USD

Why Are So Many Makers Using Mach3?

Mach3 turns a typical computer into a CNC machine controller. It is very rich in features and provides a great value to those needing a CNC control package. Mach3 works on most Windows PC’s to control the motion of motors (stepper & servo) by processing G-Code. Mach3 has many advanced features and is the most intuitive CNC control software available. Mach3 is customizable and has been used for many CNC applications with numerous types of hardware.

Mach3 will convert your PC, into a full featured CNC controller for up to 6 axis. Replace expensive custom hardware with this software solution.

Mach3 has been successfully used to control a variety of machine tools including Milling machines, lathes, routers tables, lasers, plasma cutters, engravers, EDM and gear cutters.

Mach3 can turn your Spindle On or Off & Control the Speed.Control Multiple Relays, Manual Pulse Generators and works with Touch Screen monitors.

Wizards are “mini-programs” that extend the capabilities of Mach3. Wizards can be written by anyone and are designed to allow users to quickly perform routine or convenient operations without the need to have a pre-written G-Code file. Included with Mach3 are some free Wizards that were contributed by users.

Using Mach3
These Projects Were Created...

Get Mach3 Now for $175 Just $160

Secure Your Copy of Mach3 and Take Control of Your CNC Machines…

Mach3 Has Loads of Powerful Features!

See what your G-Code creates before you start cutting. Visually spot errors before you make them.

Zoom in to see details of any part of your design. Rotate the view in 3D to see the project from any angle.

Estimate the run time of your project automatically.

Easily switch between multiple work offsets to accurately machine parts with several tool bits. Use multiple spindles on the same machine.

Use guage blocks or Triple Edge Finder to accurately locate the edge of the work piece.

Screensets are different interfaces that can be created for Mach3. Using a screenset is as simple as opening Mach3, clicking on View – Load Screens, and then selecting the desired screen.

Over 24 Screenset are currently available either Free of for a small Fee.

Mach4 Written From The Ground Up For Today's CNC!

Mach4 is more complex than Mach3 and follows CNC industry standards. Mach3 has many customizations to make it easier for hobby users, but can lead to difficulties if users plan to apply their knowledge to more advanced systems.

Get Mach4 Now for $200 Just $185

Secure Your Copy of Mach3 and Take Control of Your CNC Machines…

Dynamically Simulate Tool Path before cutting your parts

See what your G-Code creates before you start cutting. Visually spot errors before you make them.

View, rotate, pan, and scale the tool path quickly and easily to ensure G-code is creating the path you expect.

Estimate the run time of your project automatically.

Mach 4 has multiple probing routines built right in. Seven built in screens allow probing in many conceivable modes.

Built in routines for single surface probing, Corner probing, 2 surface, Bore, Boss, Surface angle and calibration modes.

Use guage blocks or Triple Edge Finder to accurately locate the edge of the work piece.

Easily switch between multiple work offsets to accurately machine parts with several tool bits. Use multiple spindles on the same machine.

Modular Design

Mach4’s modular design allows features to be added and removed without affecting the systems operation. Everything is customizable, Make the software your Own.

Create Proprietary add-ons for your version, Custom Installers, Rapid Application Development (RAD) with our Screen Design Mode, Increase or decrease functionality with Plug Ins and Add-ons, Customizable M Codes for Machine Specific Functions.

MACH GETS WORK DONE!

Frequently Asked Questions & Answers

Mach3 will run on any Windows OS from Windows 2000 through Windows 8. The parallel port driver included with Mach3 will only work with 32-bit DESKTOP computers with versions of Windows 2000 through Windows 7, but will not work with any 64-bit version of Windows or with Windows 8. Windows 8 and 64 bit versions of windows require an external motion device which can be purchased very reasonably.

A plugin (or plug-in) allows people to add custom functionality to Mach3. Plugins are written as .dll files in programming language. They are primarily used to enable Mach3 to work with hardware devices (e.g. external motion controllers), but can also be used to add functionality (e.g. Mach3’s Flash plugin) or extend existing functionality (e.g. Mach3’s Jcode plugin).

Visual C++ 2003 is required to create Mach3 plugins.

Transforming an idea into an actual part is a 3-step process: CAD –> CAM –> Control. Mach3 is the Control part of the process and requires G-code files produced by a CAM or Wizard program.
Wizard programs are the most simple for those new to CNC.
Advanced users/machinist will often write their own G-code.

Computer-aided design (CAD), computer-aided drafting (CAD), or computer-aided design and drafting (CADD) is the process of using a computer to design and draw the parts you would like to create. The CAD files then need to go through a CAM process to become the G-code files that Mach3/Mach4 uses.

Used mainly in automation, G-code is the common name for the most widely used numerical control (NC) programming language, which has many implementations. G-code is sometimes called G programming language.

Computer-aided manufacturing (CAM) is a subsequent process after CAD. The CAD files are loaded into the CAM program, the desired machining parameters (tools, cut depths, etc) are chosen, and toolpaths (in the form of a gcode file) are created which then control the machine tool. The G-code files are formatted based on the postprocessor chosen.

Select Version

Mach3 $160.00 USDMach4 $185.00 USD

Copyright 2014 - The Makers Guide - All Rights Reserved