The Makers Guide – Triple Edge Finder

The Makers Guide Triple Edge Finder

How many times have you tried to accurately set up a CNC Router workpiece but have failed time and time again?

Frustrating isn’t it? Wouldn’t you like to once and for all, really solve your workpiece setup problems so that they doesn’t bother you again?

Many people have searched high and low to find a solution to eliminate errors in setting the Z axis height accurately, but most of the time these solutions simply do not work repeatedly.

I was in your shoes before, which is why I can relate to how you’re feeling right now.

That was when I was determined to find a PRACTICAL and APPLICABLE solution to solve workpiece setups troubles. After 11 months of searching, researching, and testing, I’ve finally discovered how to solve my workpiece setup problems for good and get back to making parts instead of scrap.

THE MAKERS GUIDE TRIPLE EDGE FINDER

With The Makers Guide, you’ll discover and learn PROVEN methods that work (I know because I’ve tried and tested them.):

With the Makers Guide you will be able to accurately set up a workpiece on your CNC Router table faster than ever before. Set your Z height precisely to under .001″ (as verified by C.M.M. machine). You now have the ability to reset your workpiece even in the middle of a job with no more mistakes. Increase the value of store bought picture frames with our secret techniques.

  • Accurately set Your Z axis Height every time.
  • Automatically locate the corner edge of a workpiece.
  • Repeatably reset your starting point in the middle of a program.
  • Quickly locate the inside and outside edge of a work piece.
  • Detailed Step by Step tutorials  on How to set up and use The Makers Guide.
  • Works with Mach3 using free or inexpensive plugins. (Required)
  • Quality crafted right here in the U.S.A. on U.S. made C.N.C. Machines.


 

Your Purchase Is 100% Protected

You have nothing to lose and everything to gain. I’m so confident that The Makers Guide – Triple Edge Finder will solve your Workpiece Setup difficulties that I’m offering a 30 day “No-Questions-Asked” 100% Money Back Guarantee. Our 30 day return policy is “No-Questions-Asked”! You just pay return shipping fees. All I ask is you try out The Makers Guide Triple Edge Plate for 30 days and if you haven’t gotten faster more accurate workpiece setups in 30 days, then I don’t want your money. Simply contact me at billgriggs@makermasters.com and I’ll happily refund your purchase in full. You just pay return shipping fees.

Wait! I’m Not Finished Yet!

To sweeten the pot, and to encourage you to take action and get The Makers Guide , I’m going to throw in a cool bonus that is going to help you Set up Your work Pieces faster. Look I sincerely want you to get your problem solved fast, so I’ve created some extra resources that are going to help do just that.

The Makers Guide to Setting up your Work Piece

This free report will have you setting up your CNC router Table work Pieces like a pro. This bonus report is how Savvy Makers set up their workpieces to make faster C.N.C. projects.

 

  • You learn how to use Hold downs clamps to secure your work
  • Repeatably set your work Zero.
  • Double sided cutting tips.
  • Make Smoother cuts without ripples.
  • More accurate parts.

 

If you take a closer look at the value I’m offering today, I could easily have asked for $97. However I choose not to do that because I really want you to take my experiences and learn from them, so that you too can get your projects done faster and more accurately like I have.

Why would I do that?

It’s simple really. Once you’ve implemented the strategies and techniques I share, I KNOW you’re going to get faster more accurate workpiece setups in 30 days. I also KNOW that once that happens, you’re going to tell your friends and family about me and The Makers Guide system right?

So go ahead and Click the Add To Cart button below now to start learning how to get Faster CNC in 30 days:

Only $77





All Major Credit Card, Paypal, and Online Checks Accepted
Order 24 Hours a Day, 7 Days a Week

Box Headline Here

MACH3 BUNDLE

Purchase Mach3 CNC Control software and The Makers Guide Triple Edge Finder and save $17.

Only $235





“I want to get these in the hands of C.N.C. makers now.”

I want to get these into the hands of CNC Makers so that they can see how easy fast and accurate the Makers Guide is. I want to hear from you what you think about the Makers Guide.

I also want your honest feedback on how your workflow changed after you began using a Makers Guide. Please leave a comment below.

– Bill Griggs
www.themakersguide.com

Sincerely,

Bill Griggs

 

PS. You have nothing to lose and everything to gain. Remember my 100% Money Back Guarantee? Yes I’ll refund you in full if you don’t get faster more accurate workpiece setups in 30 Days. Heck, even if for no reason at all you want your money back – no problem! Our 30 day return policy is “No-Questions-Asked”! You just pay return shipping fees.

PPS. Don’t “think” anymore. The more you think, the more likely you’re to procrastinate. And the more you procrastinate, the less likely it is that you’re going to solve your alignment errors – meaning you’re going to be experiencing inaccurate parts forever.

Get faster more accurate workpiece setups in 30 days by Clicking the Add To Cart button below to get started immediately:

“Customer’s Testimonials “

Logo

by Patrick » Fri Aug 09, 2013 7:23 pm

“I use this thing every single day, for every single project. One of the most essential tools I have in my arsenal!”
By Anonymous >> “if I dare say it . . . . . i like my edge finder way more than I like my girlfriend.”
By Rob >> Fri Aug 09, 2013 10:54 pm “Love mine and use it every day!”

 

Only $77





All Major Credit Card, Paypal, and Online Checks Accepted
Order 24 Hours a Day, 7 Days a Week

 

Triple Front